Hard Disk Clone with "dd"

Hard Disk Clone

Suppose you have a 40GB hard disk and a removable hard disk whose capacity is 60GB, and you want to backup all the files from the hard disk to the removable disk. With "dd", it is a very easy task. Again, suppose your hard disk's Unix device name is /dev/sda and the removable disk is /dev/sdb. The following command can copy all the content from /dev/sda to /dev/sdb:

dd if=/dev/sda of=/dev/sdb

Here, if=... sets the source and of=... sets the destination. "dd" doesn't care of the contents of the hard disk. It just reads bytes from /dev/sda and writes them into /dev/sdb. It doesn't know what are files. So, the hard disk file system and how many Partitions it has are not important. For example, if /dev/sda is splitted into three partitions, the /dev/sdb will have the samepartitions. i.e. "destination" is completely same with "source".

Notice: to execute "dd" you should login as "root" or switch to "root" using "su" command. And you must be careful, a small mistake may cause a serious problem!

Making a Hard Disk Image File

Most of time you don't want to make a complete duplication of your hard disk. You may prefer to creating an image file of the hard disk and save it in other storage devices . The following command will create an image file "disk1.img" in your user's directory from /dev/sda:

dd if=/dev/sda of=~/disk1.img

Since you have created an image file, you can compress it with "gzip" or "bzip2":

dd if=/dev/sda | gzip > disk.img.gz
dd if=/dev/sda | bzip2 > disk.img.bz2

You can save much storage space with compression. But it will take very long time.

Partition Clone

Backing up a hard disk partition is much similar to backing up a whole hard disk. The reason is that Unix/Linux uses device name, such as /dev/sda1, /dev/sda5... to indicate the partitions. For example, if you want to create an image file from the first partition of /dev/sda, use "dd" like this:

dd if=/dev/sda1 of=~/disk2.img

Also, you can compress the image file:

gzip disk2.img

By the way, you can copy a partition to another partition completely, just set "of" to thepartition's device name. For example:

dd if=/dev/sda1 of=/dev/sdb5

This command will copy all the contents from /dev/sda1 to /dev/sdb5. You must be sure that the capacity of /dev/sdb5 is larger than /dev/sda1.

Restoring from an Image File

To restore a partition or a hard disk from an image file, just exchange the arguments "if" and "of". For example, restore the whole hard disk from the image file "disk1.img":

dd if=disk1.img of=/dev/sda

Restore the first partition of /dev/sda from the image file "disk2.img":

dd if=disk2.img of=/dev/sda1